Name: Panasonic EY79A2LH2F57 14.4V Cordless Hammer Drill and Driver Kit
Brand: Panasonic
Rating: 4.5 (1 reviews)

May have visible signs of wear such as scratches. 100% functional, tested and cleaned.

Acceptable

Light scratches, visible from 12cm away. 100% functional, tested and cleaned.

Good

Minor scratches and signs of wear. Invisible at a 12-inch distance.

Excellent

Minimal to no signs of wear. Invisible from a 12-inch distance. Like-new look & feel.

Premium

Unused with no signs of wear. Exactly what it is - new!

Brand New

Panasonic

OVERVIEW:
[ 14.4V Cordless Hammer Drill & Driver ]: High power drilling with extreme durability in masonry, wood and metal. Featuring a brushless motor, 4.0Ah Li-ion battery, 13mm heavy duty keyless chuck and a hybrid switch.
[ 14.4V Cordless Hammer Drill & Driver ]: The Panasonic 14.4V Dual Voltage Cordless Hammer Drill & Driver is lightweight and compact, yet powerful thanks to a powerful of 50.0N.m, with a 4.0Ah Li-ion battery. With precision variable speed control/reversible, an 18-stage clutch, optimum rotation speed control plus high power brushless motor. The EY79A2LH2F57 is ready for work with just a short 65-minute charging time. Featuring a handy LED light for user-friendly operation in dark areas, a heavy-duty keyless chuck, and an electric brake for added safety
- High power 50.0N.m
- LED light, electric brake, variable speed control/reversible
- Kit comes with 2x 4.0Ah batteries, charger and carrying case
FEATURES:
• New Brushless Motor: Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor *. (* Compared with Panasonic conventional brushed motor.)
• New Ultra Hard Chuck Jaw Tips: We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra 'bite strength' and substantially reduce wear.
• New Hybrid Switch: To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi- electronic switch. This gives smoother operation and double* the life expectancy of the part. (* Compared with Panasonic conventional switches.)
• Powerful to the Finish: The new, large diameter brushless motors generate high power and efficiency (32Nm of torque - 18V battery). Plus the newly designed control circuit increases stable current flow to motor by more than 70% *. This enables high power output to be evenly maintained until the task is completed even during high-load operation. (* Compared with previous brushless motor.)
• Increased Efficiency and Flexibility: The new 'Speed Control Function' allows the user to select from three different low rotation speed settings, based on allowable maximum speeds for metal hole saws. It greatly reduces 'run out' when using metal hole saws and prevents surface scorching on stainless steel and other materials. The advanced 'Smooth Start electronics allow easy, precise speed control, enabling the ultimate control when starting drilling or working with small screws in precise applications.
• Dust and Water. Resistant Level IP56: The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards. (
LEVEL 5 - Dust Protected / LEVEL 6 - Protected Against Powerful Water Jets)
( Performance Protection )
• Switch: An additional rubber cap seals the switch and protects it against dust and water.
• Electronics: The electronic circuits of control panel and battery pack are covered by an Urethan layer for maximum dust and water protection.
• Battery: The battery cells are designed to avoid intrusion of moisture.
• Dual Voltage for Better Versatility: Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
[ Durable New Design ]
• Over-discharge prevention sensor: Prevents over-discharge to avoid lasting cell damage or recharge problems.
• Battery overheat protection sensor: Cuts off power to the motor before the battery temperature rises.
• Individual monitoring of battery cell voltage: Each cell monitored by sensor to ensure optimal discharge control.
• Battery sensor: Flashing lamps indicates overheating battery. Battery is automatically reactivated when
temperature drops.
• Heat resistance layer technology: In cases where separator is damaged and abnormal heat is created, HRL acts to contain
this heat, just like a Fire wall.
• NNP technology: Panasonic's own developed Nickel oxide material provides higher capacity and higher reliability.

Panasonic EY79A2LH2F57 14.4V Cordless Hammer Drill and Driver Kit

Product Name

Brand

Product Series

Model Number

Feature

( High/Hard Mode )

( Low/Soft Mode )

Low/Soft Mode

[ Speed at No Load - High/Hard Mode ]

[ Max. Torque - Low/Soft Mode ]

Blows Rate per Minute - (High/Hard Mode)

Blows Rate per Minute - (Low/Soft Mode)

Clutch Torque

In Wood

In Metal

[ Max. Screws Driving - In Wood screw ]

[ Max. Screws Driving - In Self-drilling screw ]

LJ2G

PN2G

LS2F

Screwing ; Self-Drilling Screws in SPC – High Mode

Screwing ; Wood Screws in Yellow pine – High Mode

Screwing ; Wood Screws in Yellow pine – Low Mode

Screwing ; Self-Driling Screws in SPC – High Mode

Drilling ; Holes in Plaster Board + Plywood (Wooding core) – High Mode

Drilling ; Holes in SPC (Hole Saw) – High Mode

Drilling ; Holes in SPC (Hole Saw) – Low Mode

Drilling ; Holes in Yellow Pine – High Mode

Drilling ; Holes in Yellow Pine – Low Mode

Drilling ; Holes in Mortar – High Mode

Drilling ; Holes in Mortar – Low Mode

Drilling ; Holes in Masonry – High Mode

Color

Condition

Panasonic EY79A2LH2F57 14.4V Cordless Hammer Drill and Driver Kit

Shipping